ScrapBox SEW STATION Assembly Instructions Manual page 18

Table
Top
Side 1
Side Table
Side 2
15
Install power lifter using (8) 1/2" screws. If you have a left side configuration the unused pilot
holes in the base will be visible after install on the left. If you have a right side configuration the
unused pilot holes in the base will be on the right . This will assure your lifter is centered.
Connect the top of the center lift guide to the Sew Station with (2) 1/2" screws. Be careful to
screw SLOWLY and not strip the back panel.
Proprietary, patented product and assembly instructions. Do not copy or distribute.
18