Removal & Replacement
Remove Front Hub Assembly (continued)
Step 6.
Twist assembly thru frame hub.
Pull assembly until clear of frame.
Note:
Right hand thread.
Step 7.
Use hammer & punch to loosen
spanner nut on bearing.
Step 8.
Remove bearing and washer by
Slipping off crank.
Note:
Pulley and crank are a welded
assembly (cannot be separated).
Copyright 2001 True Fitness Technology, Inc.
Step 6. Twist Unit Thru Hub Frame
Step 7. Drive spanner nut off to remove bearing
Step 8. Remove Bearing & Washer
500R
Page 67