True Fitness 500U Service Manual page 4

Test Mode *750 ONLY
To Enter Diagnostic
Mode
D
Console / Display
I
Output
A
G
RPM
N
Console Key Input
O
S
Contact Heart Rate
T
I
C
S
Support Services 800-883-8783
Page 2
DA (Resistance)
Exit Diagnostics
Mon-Fri 8:30am-5:00pm Central Time Zone
Procedure
•
Press and hold the "Start" key as you
begin pedaling.
•
Continue pedaling throughout the test.
-------
•
Press "Enter" key – initiates the second
LED function test.
•
Press "Enter" key again –all LED's
should be on.
--------
•
Press "Enter" key – RPM's displayed in
the far right window.
--------
•
Press "Enter" key –A beep should sound
when each key is pressed.
--------
•
Press "Enter" key. Hold both handle
pick-ups. Heart symbol will flash and
readout will display.
-------
•
Press "Enter" key – Press + to increase
resistance and – to decrease resistance.
•
To quit diagnostics press "Enter" key or
stop pedaling and the unit will reset.
Fax: 636-272-7148