Removal & Replacement
Remove Crank Hub Assembly
Tools Required:
Large Crescent Wrench
Rubber Mallet
Flat Blade Screwdriver
Step 1.
Use crescent wrench to remove
Large nut on crank.
Note:
The crank nut has left-handed
threads. Turn clockwise to loosen.
Step 2.
Remove keyed washer from
under nut.
Step 3.
Use crescent wrench to remove
hex nut bearing. Use rubber mallet
to knock out the shaft pulley assembly.
Note:
The Hex nut bearing has left-
handed threads. Turn clockwise to
loosen.
Page 84
Copyright 2001 True Fitness Technology, Inc.
Step 1. Remove Crank Nut.
Step 2. Remove Keyed Washer
Step 3. Remove Hex Nut Bearing
600U