Remove Belt & Tensioner Assembly - True Fitness 500U Service Manual

Removal & Replacement
Remove Belt & Tensioner Assembly
Tools Required:
6 mm-Hex Wrench
13 mm Open-End Wrench
Hammer Handle
Step 1.
Use 6 mm hex wrench to remove
brake bracket locking screw.
Step 2.
Use 13 mm open-end wrench to
loosen the 4 bolts holding the
brake bracket to the frame.
Note:
Frame is slotted to allow
brake bracket to slide when
bolts are loose.
Page 90
Copyright 2001 True Fitness Technology, Inc.
Step 1. Remove Locking Screw
Step 2. Loosen Bracket Bolts
600R