Thinkware M1 Quick Start Manual page 14

Connecting via hotspot
1
Turn on the motorcycle or start the engine to turn on the product, and launch the THINKWARE
CLOUD application on your smartphone.
2
Tap Dash cam connection is required. at the bottom of the screen.
3
Press the
Wi-Fi(
area at the bottom of the screen and tap Configure New Connection.
4
Tap Next on the Wi-Fi activating screen.
5
Tap Wi-Fi Settings on the Wi-Fi Connecting screen. The Wi-Fi Settings screen will appear.
6
From the network list, select the Wi-Fi network starting with "Thinkware" and enter "123456789"
in the Password field. For security purposes, change the Wi-Fi password after the Wi-Fi
network is connected.
7
Return to the THINKWARE CLOUD application, enter your smartphone hotspot SSID and
password, and tap Next.
8
Tap Turn on hotspot on the hotspot activation screen.
9
Allow the THINKWARE CLOUD application to access on your smartphone settings.
10
Return to the THINKWARE CLOUD application and tap Turn on hotspot on the hotspot activation
screen.
11
Wait until the product is connected with your smartphone. You can see Dashcam is connected
via hotspot. on the screen when the product is connected with your smartphone.
• To disconnect the product from the application, tap Dash cam is connected via Wi-Fi at the
bottom of the main screen, and tap Confirm in the disconnection pop-up message. The product
is now disconnected from the application.
• If you disconnect the product and the application after you connect them for the first time, you
can reconnect them by tapping Connect Hotspot in the Quick Connect window and following
the instructions on the application.
• To connect a new smartphone to the product, press the Wi-Fi(
control.
on the remote control and tap connect on the Hotspot connection
) button
13
) button on the remote