Heating; Heating During The Transition Period; Cladding; Special Information - Olsberg Palena Plus Smartdoor Compact Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

Heating

● Only place the quantity of fuel required to achieve
the heating requirement.
For a nominal heating output 5,0 kW:
‐ max. 1,5 kg billet wood; burning time >45 min
‐ max. 1,3 kg wood briquettes; burning time >45 min
For max. heat output allowed:
‐ max. 3 kg billet wood
‐ max. 3 kg wood briquettes
● Open the combustion chamber door slowly for
adding new fuel, as otherwise the combustion
gases can escape.
● Empty the ash pan or combustion chamber
good time. Otherwise it is possible for the com-
bustion air intake to be blocked or for the grate to
be damaged.
● Only remove the ash pan to empty it.
● Clean the ash pan compartment regularly after
removing the ash pan to remove any ash that
may have been spilled (e.g. use a vacuum clean-
er).
Attention:
Any stove and ash residues must have
been left to cool before being removed.

Heating during the transition period

Prerequisite for the stove to function well is the correct
delivery pressure (chimney draught). This very much
de- pends on the external temperature. Therefore, if
the external temperatures are high (above 16°C) the
delivery pressure can be disrupted.
What to do?
● Open the combustion air slide valve complete.
● Only put on a small quantity of fuel.
● Frequently stoke the ash.

Cladding

● The cladding may not be overheated, as
cracks could appear.
● Use a maximum of 3 kg wood or briquette for heat-
ing.
● As the natural cladding comes from a „grown"
boulder, structure and colour scheme may be
very different.
● The surface may be altered under temperature
influence.

Cleaning

What?
inside of stove
connection piece
glass panel
painted surfaces

Special information

The manufacturer‟s guarantee expires if the stove is
significantly or permanently overloaded above the
nominal heating output, or if fuels other than those
listed are used.
● The stove must only be used with the combustion
chamber door shut.
● Never remove hot ashes. Only store ashes in a
fireproof, non-combustible container.
● Attention: The surfaces get hot Always use the
enclosed glove when operating the stove.
in
● Convection air openings may not be covered.
● Never use white spirit, benzene or other inflamma-
ble, hazardous materials to ignite the fire.
● The combustion air supply fittings must never be
al- tered. In particular, it must be ensured that any
neces- sary combustion air pies are open while
the fireplace is being used.
● Do not make any changes or modifications to the
stove.

Safety instructions

Children younger than 8 years are to be kept away from
the fireplace insert (heat source), unless they are close-
ly supervised at all times.
This fireplace insert may be used by children of 8 years
or older, as well as by persons with reduced physical,
sensory or mental capabilities or lack of experience of
knowledge, while they are being supervised or have
been given instructions concerning the safe use of the
fireplace insert, and are able to understand the result-
ing hazards.
Do not allow children to play with the fireplace insert.
Children without supervision should not be allowed to
clean or maintain the fireplace insert. If the fireplace in-
sert is not operated, you have to interrupt the power
supply (disconnect the power plug from the power out-
let).
How often?
at least 1 x per year
at least 1 x per year
as required
as required
Using what?
hand brush,
vacuum cleaner
hand brush,
vacuum cleaner
when cold us-
ing glass cleaner for
stoves- and oven glasses
when cold
with a slightly damp microfibre
cloth
19 

Advertisement

Table of Contents
loading

This manual is also suitable for:

23/5775

Table of Contents