6. The total distance between the H201Ti and the mounting point of the valve
must not exceed six times the nominal diameter of the valve (230mm [9 in] for
a 38mm [1.5in] valve). See Figure 14 below.
7. The H201Ti weighs 5.6kg (12lb). If the selected valve is subject to strong
vibrations, install a supporting bracket to reduce the load on the valve. In
case of doubt, consult your engineering personnel.
Page 24
Figure 14: Maximum Distance between the Hydran 201Ti and the Valve
Hydran* 201i Installation Guide
17996 Rev5, August 2013