GE Hydran 201i Installation Manual page 20

Hydran* 201i Installation Guide
10. Install the H201Ti horizontally; not at an angle, vertically or horizontally using
an elbow (see Figure 10 below). Elbows may cause turbulence that can
reduce the accuracy of gas level readings.
11. Do not subject the H201Ti or its sensor to high-pressure water streams (see
Figure 11 below). Used during the cleaning of transformers, they may cause
serious damage.
12. Do not punch additional openings in the H201Ci Controller's enclosure. This
enclosure already has openings for the various cables used with the Hydran
201i System.
17996 Rev5, August 2013
Figure 10: Do Not Install the H201Ti on an Elbow
Figure 11: Avoid High Pressure Water Streams
Page 21