Introduction - Schwinn MPower Echelon2 Console Installation Manual

INTRODUCTION

This installation guide details how to install and setup the following:
• Schwinn® MPower™ Echelon2 Console, P/N 740-8727
• Schwinn® MPower™ Echelon2 Optional Power Upgrade, P/N 740-8730
• Schwinn® MPower™ Echelon2 External Wiring Kit, P/N 740-8875
Use the matrix below to determine which confi guration is appropriate for the install:
Bike + Sensor Confi g.
AC Sport w/RPM (Speed)
Sensor only*
AC Sport w/RPM & Power
Sensor*
AC Performance (SKU
100175) w/RPM (Speed)
Sensor only*
AC Performance (SKU
100175) w/RPM & Power
Sensor*
AC Performance + ACPP
w/RPM Sensor only
AC Performance + ACPP
w/RPM & Power Sensor
*NOTE: The console cable must be externally routed on the AC™ Performance (100175 SKU ONLY)
and AC™ Sport model (ALL SKUs). This requires that the External Wiring Kit,
Tools Needed (not included in kit)
• Phillips screw driver
• 2.5mm hex key
• 3mm hex key
• Glove
• Soft-jaw pliers (Pliers with protective rubber or plastic caps over jaws)
Uses 740-8727? Uses 740-8730?
Y
Y
Y
Y
Y
Y
Uses 740-8875?
N Y
Y Y
N Y
Y Y
N N
Y N
740-8875
Page
Pg. 7
Pg. 7
Pg. 7
Pg. 7
Pg. 20
Pg. 20
be used.
Page 3