Advertisement
High Density LSX 288-Position Panel
Termination/Splice Panel
LSX 288-Termination and Splice Panel—Splicing in the rear eliminates rack space for a
dedicated splice point. Panel is shown here from front vantage (left) and back vantage (right)
ADC's 288-positon LSX panel is also available in a termination and splice configuration. While ADC
recommends off-frame splicing in high-density applications, often floor-space is limited and on-frame
splicing is required in a high density environment. In a 18-inch deep frame*, this panel solution saves
the valuable rack space often required for a dedicated splice panel. Panels can be ordered with 12-fiber
ribbon or 12-fiber stranded pigtails. Splice trays and cable clamps are included within the panel.
Termination/Splice Panels
O r d e r i n g I n f o r m a t i o n
Connector style
SC/APC
SC/UPC
LC/APC
LC/UPC
SC/APC
SC/UPC
LC/APC
LC/UPC
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
*See page 5 for additional accessories that accommodate the deeper panel.
w w w . a d c . c o m
Pigtail Type
Ribbon-Indoor
Ribbon-Indoor
Ribbon-Indoor
Ribbon-Indoor
Stranded-Indoor
Stranded-Indoor
Stranded-Indoor
Stranded-Indoor
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
Splice Type
Catalog Number
Mass Fusion
LSX-LL5243-A-SPL
Mass Fusion
LSX-L75243-A-SPL
Mass Fusion
LSX-LM5243-A-SPL
Mass Fusion
LSX-LK5243-A-SPL
Heatshrink Fusion
LSX-LL1242-A-SPL
Heatshrink Fusion
LSX-L71242-A-SPL
Heatshrink Fusion
LSX-LM1242-A-SPL
Heatshrink Fusion
LSX-LK1242-A-SPL
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
3
Advertisement
