HPE Aruba QSFP28 Manual page 66

Product name
2930F Series Switches
2930M Switch Series
3800 Switch Series
3810M Switch Series
4100gl Switch Series
4200vl Switch Series
5300xl Switch Series
5400zl Switch Series
5400R Switch Series
66
SKU Minimum software
required (J8177C/
J8177D)
JL253A, JL254A, All
JL255A, JL256A,
JL258A, JL259A,
JL260A, JL261A,
JL262A, JL263A,
JL264A, JL557A,
JL558A, JL559A
JL083A All
J9573A, J9574A, All
J9575A, J9576A,
J9584A
JL075A, JL083A All
J4893A, J4908A G.07.69
J8776A, J9033A All
J4878A/B E.09.22
J8705A, J8706A All
J9308A K.14.34
J9537A, J9549A, K.15.02.0004
J9535A, J9637A
J9537A, J9549A, All
J9535A, J9637A
J9988A, J9989A, KB.15.17
J9990A, J9993A
ArubaOS-Switch and ArubaOS-CX Transceiver Guide
Comments
J8177C/J8177D support both
100Mbps and 1G operation
in this Switch Series.
J8177C/J8177D are not
supported for use in the
Dual-Personality ports of the
2930M Series Switches.
For use in an installed JL083A
Aruba 3810M/2930M 4SFP+
MACsec Module.
J8177C/J8177D support both
100Mbps and 1G operation
in this Switch Series.
For use in the SFP+ ports of
the JL075A 3810M switch.
Also used in any 3810M
switch with a JL083A Aruba
3810M/2930M 4SFP+
MACsec Module installed.
J8177C/J8177D support both
100Mbps and 1G operation
in this Switch Series.
J8177C/J8177D support both
100Mbps and 1G operation
in this Switch Series.
J8177C/J8177D support both
100Mbps and 1G operation
in this Switch Series.
Table Continued