HPE Aruba QSFP28 Manual page 45

Product name
6200yl Switch Series
6300 Switch Series
All models M and F
6400 Modules with
SFP+ or SFP56 ports
6600 Switch Series
8200zl Switch Series
Chapter 5 SFP+ modules
SKU Minimum software required
(J9281B/J9281D, J9283B/J9283D,
J9285B/J9285D)
J8992A K.14.50
10.04.0001
R0X39A, R0X40A, 10.04.0001
R0X41A, R0X42A,
R0X43A, R0X44A
J9264A, J9265A, K.14.32
J9452A
J9309A K.14.39
Comments
J8992A fixed SFP ports are
1GB and do not support
these SFP+ copper cables.
For use in an installed
J9312A 10GbE 2-port SFP
+/2-port CX4 yl Module.
J9285B/J9285D or any type
of 7m DAC is not supported
in any 6300 model.
J9281B/J9281D
• 8121-1151
• 8121-1300
J9283B/J9283D
• 8121-1152
• 8121-1298
J9285B/J9285D or any type
of 7m DAC is not supported
in any SFP56 port.
J9281B/J9281D
• 8121-1151
• 8121-1300
J9283B/J9283D
• 8121-1152
• 8121-1298
J9285B/J9285D
Only supported in SFP+
ports on R0X43A
• 8121-1154
• 8121-1305
The J9309A 4-port SFP+
module only supports 10G
transceivers.
Table Continued
45