Product name
NOTE: J9152D 10G LRM with 4x4 1990-4485 does not require the use of a mode conditioning
patch (MCP) cable. Older J9151A with 4x4 #s other than 1990-4485 may require an MCP when
you use OM1 or OM2 fiber cables. Never use mode conditioning patch cables for OM3 or OM4
fiber types. For more information about mode conditioning patch cables, see related parts in
the IEEE 802.3 standard.
10G SFP+ copper transceiver modules
Figure 16: 10G SFP+ copper transceiver module
Models, specifications, and compatibility
Table 36: Specifications for SFP+ copper transceiver modules
Product name (SKU)
Aruba 10GBASE-T SFP+ RJ45 30m
Cat6A XCVR (JL563A)
Chapter 5 SFP+ modules
SKU
10G-SR, LR, LRM
(J9150A/J9150D,
J9151A/J9151D/J9151E,
J9152A/J9152D)
Transmission
distance
30 m (98.43 ft)
Minimum software required
10G-ER (J9153A/
J9153D)
Data rate
10G
Comments
1990-4635,
1990-4634
• J9151A/J9151D:
1990-4657,
1990-4727,
1990-4694
• J9151E:
1990-4727,
1990-4694
• J9152A/J9152D:
1990-4485
• J9153A/J9153D:
1990-4365,
1990-4656
Cable type
Connector
type
1
STP Cat6A
RJ-45
41