Table of Contents
Advertisement
Product name
Aruba 8320 48p 10G
SFP/SFP+ and 6p 40G
QSFP+ Switch
Aruba 8325 Switch
Series
Chapter 6 SFP modules
SKU
Minimum software required
(J4858C/J4858D, J4859C/J4859D,
J4860C/J4860D)
J9537A, J9549A,
K.15.02.0004
J9535A, J9637A,
J9538A, J9548A,
J9536A
JL479A
All
JL624A, JL625A
10.03.0010
Comments
The J9309A 4-port SFP+
module only supports
10G transceivers
The J9538A 8-port SFP+
v2 module supports
both 1G and 10G
transceivers.
Only the following 4x4
part numbers are
supported:
• J4858C/J4858D:
1990-4395, 1990-4415
• J4859C/J4859D:
1990-4116, 1990-4414
• J4860C/J4860D:
1990-4363
Only the following 4x4
part numbers are
supported:
• J4858C/J4858D:
1990-4395,
1990-4415
• J4859C/J4859D:
1990-4116,
1990-4414
• J4860C/J4860D:
1990-4363
The 8325 requires
configuration of
"interface groups" to
enable use of 1G or 10G
transceivers or DACs in
the SFP28 ports (default
is to use 25G
transceivers/DACs). See
the Installation Guide for
details.
1G optics at opposite
end must NOT enable
auto-negotiation and
operate in full duplex.
Table Continued
53
Advertisement
Table of Contents
