HPE Aruba QSFP28 Manual page 44

Product name
2910al Switch Series
2920 Switch Series
2930F Switch Series
2930M Switch Series
3500yl Switch Series
3800 Switch Series
3810M Switch Series
5400zl Switch Series
5400R Switch Series
6120 Switch Series
44
SKU Minimum software required
(J9281B/J9281D, J9283B/J9283D,
J9285B/J9285D)
J9145A, J9146A, W.14.28
J9147A, J9148A
J9726A, J9727A, All
J9728A, J9729A,
J9836A
JL253A, JL254A, All (J9281B/J9281D and J9283B/
JL255A, JL256A, J9283D only. See comment for
JL258A, JL263A, exception)
JL264A, JL558A,
JL559A
JL319A, JL320A, All
JL321A, JL322A,
JL323A, JL324A
J8692A, J8693A, K.14.50
J9310A, J9311A
J9575A, J9576A, All
J9573A, J9574A,
J9584A
JL071A, JL072A, All
JL073A, JL074A,
JL076A
JL075A All
J9309A K.14.39
J9538A, J9548A, K.15.02.0004
J9536A
J9538A, J9548A, All
J9536A
J9990A, J9993A KB.15.17
516733-B21 All
ArubaOS-Switch and ArubaOS-CX Transceiver Guide
Comments
For use in the J9008A 2-port
10GbE SFP+ al module.
The SFP ports on the
models listed do not
support these 10G SFP+
cables. For use in an
installed J9731A Aruba 2920
2-port 10GbE SFP+ .
Unlisted models lack 10G
SFP+ ports.
J9285B/J9285D or any type
of 7m DAC is not supported
in any of these series.
For use in an installed
JL083A Aruba 3810M/2930M
4SFP+ MACsec Module
J9285B/9285D (7m DAC) is
supported in all 2930M
models.
For use in an installed
J9312A 10GbE 2-port SFP
+/2-port CX4 yl Module.
Unlisted models not lack
SFP+ ports.
For use in an installed
JL083A Aruba 3810M/2930M
4SFP+ MACsec Module.
For use in the JL075A SFP+
ports or used in an installed
JL083A Aruba 3810M/2930M
4SFP+ MACsec Module.
The J9309A 4-port SFP+
module only supports 10G
transceivers.
Table Continued