Sfp+ Dac Cables - HPE Aruba QSFP28 Manual

1
See Transmission distance.
Table 37: Compatibility for SFP+ copper transceiver modules
Product name
Aruba 6300 with SFP+/SFP28/
SFP56 ports
Aruba 6400 modules with SFP+ or
SFP56 ports
Aruba 8320 48p 10G SFP/SFP+
and 6p 40G QSFP+ Switch
Aruba 8325 48Y8C
Aruba 8400X 32p 10G SFP/SFP+
Msec Module

SFP+ DAC cables

Figure 17: SFP+ DAC cable
42
SKU Minimum software
required (JL563A)
All models M 10.04.0001
and F
R0X39A, R0X40A, 10.04.0001
R0X41A, R0X42A,
R0X43A, R0X44A
JL479A 10.01.0011
JL624A , JL625A 10.03.0030
JL363A 10.00.0018
ArubaOS-Switch and ArubaOS-CX Transceiver Guide
Comments
JL563A does not support 1G
operation; only 10G. It is only
supported in ports 1 – 12. A
maximum of 12 JL563A
transceivers can be used in a
switch.
JL563A does not support 1G
operation; only 10G.
It is only supported in the
top two rows, ports 1 – 17. It
is disallowed in ports 3, 6, 9,
12, and 15. Use in any other
port generates an
incompatible interface
error (meaning the port does
not support the use of this
transceiver; move the
transceiver to another port.
A maximum of 12 JL563A
transceivers can be used in a
switch.
JL563A does not support 1G
operation; only 10G. It is only
supported in ports 1 – 12. A
maximum of 12 JL563A
transceivers can be used in a
line card.