Chapter 2 Qsfp28 Modules; Qsfp28 Optical Transceiver Modules That Use Mpo Connectors; Models, Specifications, And Compatibility - HPE Aruba QSFP28 Manual

QSFP28 optical transceiver modules that use MPO
connectors
See Chapter 1, "Overview", for information regarding MPO connectors and cable requirements.
Figure 5: QSFP28 optical transceiver module that use MPO connectors

Models, specifications, and compatibility

QSFP28 optical transceiver modules provide a transmission rate of 100 Gbps and use MPO connectors.
Table 7: Specifications for QSFP28 optical transceiver modules that use MPO connectors (1)
Product name
(SKU)
Aruba 100G
QSFP28 MPO SR4
100m 12-fiber
MPO MMF
Transceiver
(JL309A)
NOTE: SR4 is not supported for use over MMF OM1 or OM2 fiber. (The IEEE standard does not
state a specification.) Use MPO Female connectors (no pins) with MPO transceivers.

Chapter 2 QSFP28 modules

DOM - Digital Central
Optical wl (nm)
Monitoring
(4x4 part #)
YES 850
(1990-4680,
1990-4678)
Fiber Fiber Modal
mode diameter bandwidth
(µm) (MHz*km)
MMF 50/125 2000 (OM3)
4700 (OM4)
Chapter 2
QSFP28 modules
Transmission
distance
70 m (229.66 ft)
100 m (328.08 ft)
15