Braun cruZer body 5 Manual page 13

Cleaning and maintenance
After each use, clean the cruZer body.
Remove the trimming comb and brush it out.
You may also use the brush to clean the trimmer if it has been used for dry
applications only.
If you have used the cruZer body with shaving gel or foam, rinse it under hot,
running water as shown (in picture f). Shake well to remove excess water
and leave to dry.
Apply a drop of light machine oil onto the trimmer on a weekly basis.
Replacing the shaving system
The shaving system (3) has to be replaced when the green stripe becomes
discoloured. Use Gillette Fusion cartridges only.
Extend the slider, press the release button (4) to eject the used shaving
system.
Insert the appliance into the refill organizer to collect a new one (picture g).
In case the cruZer body has dropped onto the shaving system, replace the
shaving system for safety reasons.
Environmental notice
This product contains rechargeable batteries. In the interest of
protecting the environment, please do not dispose of the product in
the household waste at the end of its useful life. Disposal can take
place at a Braun Service Centre or at appropriate collection sites
provided in your country.
Subject to change without notice
For electric specifications, see printing on the charger.
14