Mazda CX-30 2020 Owner's Manual page 319

▼ Intelligent Speed Assistance (ISA) Display
The setting status of the ISA is displayed in the active driving display or the display in
the instrument cluster.
Indication on
multi-informa-
Status tion display/
active driving
Stand-by dis-
play
Setting display
Cancel display
Warning display
▼ Activation/Deactivation
NOTE
When the ignition is switched off, the
system status before it was turned off is
maintained.
For example, if the ignition is switched
off while the ISA is operating, the
system will be operable when the
ignition is switched ON the next time.
Activation
Press the LIM switch to activation the
system. The ISA screen is displayed,
and the ISA standby indication displays
in white.
display
Displays when the speed limiter switch is operated and the system
is turned on.
Turns off when the system is turned off.
Displays when the RES switch up (SET+) or down (SET-) is operated
(while the ISA set indication is displayed), and the speed is set.
Displays when any of the following operations is done and the sys-
tem is temporarily cancelled.
CANCEL switch is operated

Accelerator pedal is strongly depressed

Any door is opened

The driver's seat belt is unfastened

If the vehicle speed exceeds the set speed by about 5 km/h (3
mph) or more, the ISA display flashes.
The display flashes until the vehicle speed decreases to the set
speed or less.
A warning beep is activated at the same time as the warning dis-
play.
Refer to Speed Limiter Warning Beep on page 7-72.
Explanation
Deactivation
Press the LIM switch again to
deactivation the system. The ISA screen
is no longer displayed and the ISA
indication does not display.
▼ Setting the System
When Driving
i-ACTIVSENSE
4-171