Mazda CX-30 2020 Owner's Manual page 301

▼ Setting the System
Operation conditions
Headway control function
The CTS operates when all of the following conditions are met.
(Automatic transmission vehicle)

The vehicle speed is about 0 km/h (0 mph) to 200 km/h (125 mph)

km/h (90 mph)
The selector lever is in the D or M position (manual mode).

(Manual transmission vehicle)

The vehicle speed is about 30 km/h (19 mph) to 200 km/h (125 mph)

km/h (90 mph)
The shift lever is in a position other than the R or N position.

The clutch pedal is not depressed.

The CTS is operating.

The headway control function of the Mazda Radar Cruise Control (MRCC) or

Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) is set to operable (if it was set to inoperable, set it to operable using the
personalisation function).
The brake pedal is not depressed.

The parking brake is released (Electric Parking Brake (EPB) indicator light is turned

off).
There is no problem with the DSC.

All the doors are closed.

The driver's seat belt is fastened.

*
1 European models
*
2 Except European models
NOTE
(Automatic transmission vehicle)
Under the following conditions, the CTS cannot be used when the vehicle speed is

30 km/h (19 mph) or slower.
There is a problem with the stop hold control function.

There is a problem with the Electric Parking Brake (EPB).

The CTS may not launch directly after the engine starts.

Steering assist function
The steering assist function operates when all of the following conditions are met.
Your vehicle is moving and less than about 55 km/h (34 mph).

*2
.
*2
.
When Driving
i-ACTIVSENSE
*1
/145
*1
/145
4-153