Mazda CX-30 2020 Owner's Manual page 185

Signal
*
Intelligent Speed Assistance (ISA) Set Indication
*
Adjustable Speed Limiter (ASL) Set Indication
(Green)
*
Cruise Standby Indication
(White)
*
Cruise Set Indication
(Green)
*
1 The light turns on when the ignition is switched on for an operation check, and
turns off a few seconds later or when the engine is started. If the light does not
turn on or remains turned on, have the vehicle inspected at an expert repairer
(we recommend an Authorised Mazda Repairer).
*
2 The light turns on continuously when the parking brake is applied.
▼ Wrench Indication/Indicator Light
The wrench indication/indicator light
is displayed/turns on under the
following conditions.
When the preset maintenance

period has arrived.
Refer to the Information section in
the Mazda Connect Owner's
Manual.
CAUTION
When the maintenance period
arrives, have your vehicle inspected
by an expert repairer (we
recommend an Authorised Mazda
Repairer) as soon as possible. If
maintenance is neglected, a
decrease in vehicle performance
may occur which could cause
damage. Have your vehicle
inspected before the maintenance
period arrives.
Instrument Cluster and Display
Indicator
If the vehicle continues to be
driven after the engine oil
replacement period has passed, it
could cause damage to the engine.
Replace the engine oil before the
maintenance period arrives.
(SKYACTIV-D 1.8)
Depending on the vehicle use
conditions, engine oil replacement
is required due to engine oil
deterioration from fuel penetrating
the engine oil. If "Excessive Oil
Level. Have the Vehicle Inspected"
is displayed on the
multi-information display in the
instrument cluster, have your
vehicle inspected at an expert
repairer (we recommend an
Authorised Mazda Repairer).
(SKYACTIV-D 1.8)

When fuel filter (sedimentor)

draining is required. Consult an
expert repairer (we recommend an
Authorised Mazda Repairer).
When Driving
Refer to
4-170
4-166
4-227
4-227
4-37
*Some models.