Mazda CX-30 2020 Owner's Manual page 30

Essential Safety Equipment
Seats
The driving position adjustment is

cancelled in the following cases:
The seat adjustment switch on the

driver's seat is operated.
The angle of the outer mirrors is

adjusted.
The SET button is pressed.

Programming button 1 or 2 is

pressed.
The lock button or unlock button

on the transmitter is pressed.
The vehicle starts moving.

The active driving display is

adjusted.
(Manual transmission)

The parking brake is released.
(Automatic transmission)

The selector lever is shifted to a
position other than P.
Erasing programmed driving positions
Erasing the driving positions
programmed to the key
1. Switch the ignition OFF.
2. Press the SET button continuously
until a sound is activated.
3. Press the lock button on the
transmitter within 5 seconds after
the sound is activated.
NOTE
If you do not perform the operation
correctly, a sound indicating that the
programming has failed is activated.
2-12
*Some models.
▼ Adjusting the Front Passenger's
Seat
1. Seat Slide
To move a seat forward or
backward, raise the lever and slide
the seat to the desired position and
release the lever.
Make sure the lever returns to its
original position and the seat is
locked in place by attempting to
push it forward and backward.
2. Height Adjustment
To adjust the seat height, move the
lever up or down.
3. Seat Recline
To change the seatback angle, lean
forward slightly while raising the
lever. Then lean back to the desired
position and release the lever.
Make sure the lever returns to its
original position and the seatback is
locked in place by attempting to
push it forward and backward.
*