Robot Safety Stop; Prolonged Inactivity And Restarting - AMBROGIO L15 Deluxe User Manual

Robot lawn mower

Installation manual (8 pages)

Table of Contents

During use, it may be necessary to stop the robot. In normal conditions, the robot can be stopped with the "OFF" key. In case

of danger or when performing any maintenance, it is necessary to stop the robot in safe conditions in order to prevent the blade

from accidentally starting. Press the "STOP" key to stop the robot. Disconnect the power plug from the electrical outlet.

Important

The robot safety stop is necessary during

maintenance and repairs (for example, blade

replacement, cleaning operations, etc.).

To start, proceed as indicated:

position the robot inside the cutting area;

press the ON/OFF key and wait a few seconds for the robot to

turn on completely.

press the START/PAUSE key to start the work cycle.

After a long period of inactivity of the robot and before the mowing season, it is necessary to perform a series of operations to

guarantee the correct functioning at the time of reuse.

1. Fully charge the battery before winter storage. Recharge the battery at least once every five months.

2. Have the routine maintenance performed by an authorised dealer. This is essential for keeping the robot in good condition.

The assistance service usually includes the following operations:

•

total cleaning of the robot, the cutting blade and all the other moving parts;

•

cleaning of the inside of the robot;

•

checking of robot functioning;

•

checking and, if necessary, replacement of any worn parts such as the cutting blade, the brushes (only in robots equipped

with brushed motors);

•

checking of the battery capacity;

•

if necessary, the dealer may also load new software.

3. Accurately clean the robot and charging station (see "Robot Cleaning")

4. Check any worn or damaged components such as the cutting blade and evaluate their replacement.

5. Store the robot in a protected and dry place with an ambient temperature between 10° and 20° C, out of reach of foreign

elements (children, animals, other foreign objects, etc.). Store the robot at a temperature below 20°C in order reduce the

automatic discharge of the batteries.

6. Disconnect the power plug (A) from the electrical outlet.

7. Cover the charging station (C) to prevent any foreign materials from getting inside (leaves, paper, etc.) and for preserving

the contact plates.

User's manual