bSeen Xiaomi edition was designed to be installed inside your Xiaomi's
deck, and it uses Xiaomi's battery power to operate.
PROCEED WITH CAUTION AND READ CAREFULLY
The installation of the bSeen kit requires basic electric skills, such as
connector block connections and stripping electrical wires.
If you're not familiar with such proceedings, ask for support from your
electric scooter dealer or from an automotive electrician professional.
Damage to the bSeen ECU, LED units and/or Handlebar Control Unit
due to faulty connections, short circuits or polarity inversions, will not be
covered by warranty.
INSTALLATION - HANDLEBAR CONTROL UNIT
With the electric scooter upright, start by removing the handlebar grip by
sliding it, as shown below:
Step 1
INSTALLATION
Step 2