Xiaomi M365 Edition Owner's Manual page 18

INSTALLATION - CONNECTIONS - LED UNITS
The LED units connections are made on the left connector block (view
from top of ECU). The Right LED units - front and rear - are connected in
parallel mode. The same applies for the Left LED units - front and rear.
You will need to strip the wires in order to connect them to the ECU's
connector block.
With a small cutter or a Stanley knife strip each core about 1 inch (2.5cm):
Join the positive cores and the negative cores of the Left LED units (front
and rear), and do the same for the the Right LED units (front and rear):
Front LED unit Rear LED unit Front LED unit Rear LED unit
Left LED units Right LED units