Advertisement
SERVICE MANUAL
9°
90°
9°
Adjustment from 9° open (tilted backward) to 9° close (tilted frontward) with respect to 90° to the seat.
The backrest tube is fixed with 4 bolts A, two on the outer side and two on the inner side of the wheelchair.
To adjust the angle, loosen the 4 bolts and swing the tube frontward or backward to the desired inclination.
Finally, tighten the 4 bolts A.
In some case, the closest backrest angle may create interference between the backrest tubes and the seat tubes when folding the
wheelchair.
Should that happen, open the backrest angle the strictly necessary.
Remember that the backrest angle affects the point of balance of the wheelchair.
In fact, if tilted backward (open angle) the wheelchair becomes less stable .
It is advisable to spread a
drop of mild lock thread
glue on the bolts A.
REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV - www.rehateamprogeo.com
BACKREST ANGLE
Dynamic (first version) and Dynamic 2.0 rear frame
9°
90°
9°
A
A
Service Manual EXELLE /EXELLE VARIO 46
Advertisement
