Table of Contents
Advertisement
BASICS
Positioning the Breeze Pro Sensor
Included Mounting Accessories
Adjustable Base:
The main bracket used for mounting
onto flat surfaces or with added U-bolts
(sold seperately). The grooves and Hand
Screw allow the bracket to secure to
angled surfaces while still ensuring the
Mast and sensor are level.
For Accurate Measurements
•
Ensure the sensor is mounted level with the Solar Panel facing
directly to the south. This will help optimize battery life and transmit
correct wind direction readings.
•
Ideally, the Breeze Pro Sensor should be mounted on the tallest
object in your area. Avoid positioning the sensor in line with or
below eaves, rooflines, trees, or other objects that may obstruct
wind readings.
•
Make sure all screws on the Mounting Bracket, Winds Cup, Wind
Vane, and Battery Compartment are securely fastened.
•
The sensor should be mounted with the Wind Cups on top.
•
The Breeze Pro sensor has a transmission range of 330 feet from
sensor to display.
Mast:
The horizontal conduit
where the sensor attaches.
This piece will connect to
either the Adjustable Base
or the Pole Adapter.
Hand Screw:
Used to lock down and
secure the Mast to the
Adjustable Base or Pole
Adapter.
Alignment Arrows:
These Arrows provide exact 90 or
180 degree angles when aligned
with the arrow on the Mast.
Pole Adapter
Used in place of the Adjustable
Base for mounting on top of
cylindrical conduits.
1-Inch Maximum Pole Diameter
5
Hide quick links:
Advertisement
Table of Contents
