Support; Factory Reset; Stay In Touch; We're Here To Help - La Crosse Technology 79400 Setup Manual

Would you like backyard rain data as well?
Model Number LTV-R3 Rain Sensor
www.lacrossetechnology.com/R3RainSensor
Model Number LTV-TH2 Temp/Humidity Sensor
www.lacrossetechnology.com/ltv-th2
Model Number LTV-WL1 Water Leak Sensor
www.lacrossetechnology.com/ltv-wl1

SUPPORT

Factory Reset

If you're still experiencing issues, press and
hold the WIND ALERTS
down together until the display beeps.
You do not need to remove the button cell
battery to restart the station.
Having Trouble? We're here to help.
For detailed product videos, manuals, and more, visit our support website:
www.lacrossetechnology.com/support/
Make sure you have your product's model number handy (79400)
If you need additional support, get in touch with our friendly customer support team:
Online: bit.ly/contact_techsupport
Phone Number: 1.608-782-1610
Representatives are available Monday-Friday, 8:00am to 6:00pm CST
and LIGHT buttons

Adding Sensors to Your Station

Hold the EXTRA
1.
Reception Indicator
Install batteries into your sensor. If the sensor
2.
has a TX button, press it to force a transmission
signal. This button is usually located in or near
the sensor's battery compartment. The LED light
on the sensor will flash once.
3. Your sensor should connect within the next 3
minutes, briefly displaying its ID and type on the
LCD. The Sensor Reception Indicator will show
solid on the screen when a sensor is connected.
4. Press the EXTRA
data you'd like displayed on the LCD. The
Auto Scroll Icon ( ) will appear if activated.
Note: When first powering up, or after a factory
reset, extra sensors should automatically connect
to your station.

Stay in Touch

Ask questions, watch set up videos, and
provide feedback on our social media outlets.
Follow La Crosse Technology on Youtube,
Facebook, Twitter, and Instagram.
button until you see the Sensor
start to animate.
button to cycle through the
12