Table of Contents
Advertisement
PRESSURE
Relative Pressure
Pressure Reading Example
EXTRA SENSORS
Add-On Temperature & Humidity Sensor
If you feel the temperature & humidity is not reading correctly from your Breeze Pro
Sensor, you can add a separate sensor to your system.
Adding a Separate Temperature & Humidity Sensor
1.
Press the
SENSOR
section light up on screen. "ID WTH 123" and "TWH SENSOR" will appear below.
Hold the
MINUS
(-) button to delete these Temperature & Humidity readings.
2.
Press the
SENSOR
3.
again. Then hold the
to animate.
4.
Install new batteries into the add-on sensor and press the
compartment. The LED light on the sensor will flash.
The sensor should connect almost instantly with its data appearing on screen. The
5.
icon will remain solid on screen when an add-on TH sensor is being used.
Additional Add-On Sensors
Need a Rain reading? Want an additional Temperature/Humidity
sensor?
This station can display data for up to 4 extra sensors. This data will
appear in the green EXTRA SENSOR section on the LCD.
Find compatible sensors at:
www.lacrossetechnology.com/sensor-finder/
•
Your Relative Pressure reading will come from your station's internal
barometer.
•
Please allow up to 10 days for automatic calibration, or program your
local pressure value in the Settings Menu.
•
The arrows located to the left of the values represents Pressure
Tendency (rising/falling).
button until you see the Outdoor Temperature and Humidity
button until this Outdoor Temp. and Humidity section lights up
PLUS
(+) button until the blue Sensor Reception Indicator
TX
button inside its battery
Rain Data Example
starts
11
Hide quick links:
Advertisement
Table of Contents
