Planet GS-4210 Series Quick Installation Manual page 8

 Configuring IP address
3. At the"GS-4210 Series#" prompt, enter "configure".
4. At the "GS-4210 Series(config)#" prompt, enter the following command and
press <Enter> as shown in Figure 3-4.
GS-4210 Series(config)# ip address 192.168.1.100 mask 255.255.255.0
GS-4210 Series(config)# ip default-gateway 192.168.1.254
The previous command would apply the following settings for the Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
5. Repeat Step 1 to check if the IP address has changed
If the IP is successfully configured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of the GS-4210
Managed Switch Series through the new IP address.
8
Figure 3-4: IP Address Screen