American Standard Spalet CEAS7SS1 User Manual page 33

SHOWER, BIDET
Symptoms
Seat sensor not been
No action
activated.
Water supply valve is off . Turn on the water supply valve.
Mesh of fi lter is blocked.
Water pressure is too
low, and spray strength is
Water does not
set to "LOW".
spray out of
nozzles
Seat sensor not been
activated.
Warm water tank is not
fi lled with water.
Water temperature is
not adjusted to a proper
temperature.
Water
Cleaning function has
temperature is
been used for a longer
not comfortable
than normal period.
It is in power saving
mode.
Probable causes
32
Recommended action
Adjust sitting position, posture etc.
Clean the fi lter.
Set spray strength to "HIGH".
Adjust sitting position, posture etc.
Test run.
Press WATER TEMP. button and adjust
it to a suitable temperature.
Wait 3 minutes for water to reheat.
Release the power saving mode.