American Standard Spalet CEAS7SS1 User Manual page 15

5. Fix E-bidet securely
(1) Adjust 3C forward and backward and then
tighten 3A.
Reference torque: 1.0~3.0 N.m (about 10-
30 kgf.cm).
(2) Place 3F at front of 3C to make 3F and 3C
align center.
(3) Slowly push 3F backward until it reaches
bottom and a slight "click" is heard.
Slightly shake 3F to front, rear, left and
right to make sure the body is fi xed securely.
Pay attention to followings during installation:
(1) Please note the front and rear directions of
mounting plate.
(2) Please note the installation direction of small
sliding block.
Make concavity side
face the front of bowl.
Make the teeth side
of small sliding block
face fi xing plate.
14
3A
3C
3F
3A
Engage
each other
3C