PASCO PASPort PS-2132 Quick Start

Charge Sensor
PS-2132
Sensor Specifications:
Sensor Range:
Resolution:
Input Resistance:
Input Capacitance:
Input Cable:
Maximum Input Voltage:
®
Zero button
0.1 µC or 10 V
± ±
500 µV, 5.0 pC
12
10 ohms
0.01 µF 5%
±
0.9 m length, shielded
150 volts dc, continuous
±
800-772-8700 • 916-786-3800 • techsupp@pasco.com • www.pasco.com
C ha rge Se n so r Q u ick S tart
The PS-2132 Charge Sensor measures charge (in Coulombs) and voltage (in volts).
A d d i ti o n al E qu i p m en t N e ed e d
• PASPORT TM USB interface [USB Link (PS-2100), Xplorer (PS-2000), or a Power-
Link (PS-2001)]
• EZscreen or DataStudio
E qu i p m en t S e t up
1. Connect the PASPORT interface to a USB port on your computer or to a USB hub.
2. Connect the input cable to the receptacle on the Charge Sensor.
3. Connect the 9-pin connector on the Charge Sensor to a PASPORT interface.
4. The software launches when it detects a PASPORT sensor. Select a choice from the
PASPORTAL window.
1
®
software (version 1.7.2 or later)
2
4
3
012-08282A