ON/OFF Switch
Red LED
Equipment and Software
Included
PASCO AirLink
Sensor Interface
2
USB Cable* for GLX or SPARK
Science Learning System
Also Required
PASPORT Sensor
iPad or iPhone 3G or iPhone 3GS or
iPod touch (2nd or 3rd generation)
SPARKvue app
DataStudio Software (1.9.8r9 or later)
Bluetooth compatible computer
Introduction
The PASPORT AirLink
2
sensors that wirelessly connects to iPad™, iPhone® and
iPod touch® devices and Macintosh® and Windows® com-
PASPORT AirLink
USB Port
(not shown)
Part Number
PS-2010
PS-2528
* not shown
see catalog or web site
and
see www.apple.com
see www.itunes.com/apps/
or
see catalog or web site
1
is a sensor interface for PASPORT
®
PS-2010
Green LED
Lanyard Loop
Yellow LED
puters through Bluetooth™. The AirLink
lithium polymer (Li-Poly) battery (installed) and comes with a
USB cable that allows the battery to be recharged while the
AirLink
is connected to a computer's USB port or a USB
2
power supply.
About the Manual
Part One of this manual describes how to use the AirLink
with the iPad, iPhone or iPod touch, including how to down-
load and run the SPARKvue application on the iPad, iPhone or
iPod touch. Part Two describes how to use the AirLink
interface with a computer and the PASCO DataStudio pro-
gram.
Bluetooth Requirements
The iPad, iPhone and iPod touch are Bluetooth compatible.
Consult your computer's documentation to determine if it is
Bluetooth-capable. Your Macintosh computer must be running
Mac OS X 10.2.1 or higher and your Windows computer must
be running Windows XP with Service Pack 2 (SP2) or higher.
1
If your computer is not already Bluetooth capable, you may
be able to add Bluetooth capability by purchasing a Bluetooth
module that connects to a computer's USB port (such as the
PASCO PS-2553 Bluetooth USB Adapter). When setting up a
Windows computer with Bluetooth, it's best to try the default
Instruction Manual
012-11114B
*012-11114*
2
uses a rechargeable
2
2
sensor
2