Table of Contents
Advertisement
Installation
Mounting the Extrusion
1.
Depending on the mounting method used in the installation:
a) MT-BLACK and Direct Mounting - Loosen the twist locks on
the telescopic rods to loosen the extension sections.
b) MT-RED Mounting - Loosen the clamp handles securing the
rods. Slide the rods forwards to improve access.
12
2.
Remove the two protective end caps from the extrusion.
3.
Observing the correct orientation, slide the extrusion over the
clamps on the end of the rods.
Advertisement
Table of Contents
Need help?
Do you have a question about the LED12TFT-ME and is the answer not in the manual?
Questions and answers