Advertisement
Quick Links
P A R T S L I S T
Item
Qty
Description
A
1
PB130 Base
C
Inner Pole
1
E
1
Net
G
1
Hoop Angle Adjustment Pin
I
1
3/8" X 3" Hex Bolt
♦
Inspect all contents prior to installation. Report any missing parts to dealer immediately.
♦ Read all instructions before proceeding.
1. Using the PB130 Hardware (H) and the Instructions included with the PB130 Base (A)
remove the PB130 Base (A) from the shipping pallet and assemble. Using the 3/8" X 3"
Hex Bolt and 3/8" Lock Nut from the PB130 Hardware (H) bolt the Inner Pole (C) into
the socket on the PB130 Base (A). See Figure 1.
2. Attach the Hoop (D) to the Outer Pole (B) using the 3/8"X 3" Hex Bolt (I) and the 3/8"
Lock Nut (J), be sure to feed the 3/8" X 3" Hex Bolt (I) through the end of the lanyard
that is attached to the Hoop Angle Pin (G). Adjust the Hoop (D) to the desired angle and
install the Hoop Angle Pin (G). See Figure 2.
Figure 1
Date: 12/18/2014
Rev: 1
—— Instruction Manual ——
VB01XL
Acu-Set Volleyball Trainer
B.A.
N.J.C.
Item
Qty
Description
B
1
Outer Pole
D
1
Hoop
F
1
Height Adjustment Pin
H
1
PB130 Hardware
J
1
3/8" Lock Nut
Figure 2
File: PUB\Instructions\Volleyball\VB01XL
1
Ref#: 960704
Advertisement
Related Manuals for Bison VB01XL
Summary of Contents for Bison VB01XL
- Page 1 Hoop Angle Pin (G). Adjust the Hoop (D) to the desired angle and install the Hoop Angle Pin (G). See Figure 2. Figure 2 Figure 1 Date: 12/18/2014 Rev: 1 B.A. N.J.C. File: PUB\Instructions\Volleyball\VB01XL Ref#: 960704...
- Page 2 3. Install the Net (E) on to the Hoop (D) by rolling the Velcro® straps around the Hoop (D) and back on to themselves. See Figure 3. 4. To raise and lower the Hoop (D) remove the Height Adjustment Pin (F), raise the Outer Pole (B), re-install the Height Adjustment Pin (F) at the desired height.