Feig Electronic PAN MOBILE ID ECCO Lite User Manual page 13

IDENTIFICATION ID ECCO:Lite 6 Operation
RightKeyText="RIGHT"
Set the static data you want to be saved or sent by Bluetooth if key 4 is pressed for 4 seconds.
DeviceID="0000"
Set the custom device ID
OutputFormatDB="%t;%b"
Set the record format for the data record (Batch mode).
OutputFormatBT="%b"
Set the record format for the data record (Bluetooth mode).
TimestampFormat="%Y-%m-%d %H:%M:%S"
Set the time format.
Signal=63
reserved
PureScan=0
Activate PureScan mode. In PureScan mode all keys can read barcode. The barcode will be saved or sent
with the button name the code has been read with.
PureScan=0 // PureScan mode deactivated
PureScan=1 // PureScan mode activated
KeyBeep=1
KeyBeep=1 // key click activated
KeyBeep=0 // key click deactivated
[BT]
Available=1
Automatically determined value from the Hardware initialization.
Available=1 // Bluetooth module present
Available=0 // Bluetooth module not found
Enabled=1
Enabled=1 // Bluetooth mode activated
Enabled=0 // Bluetooth mode deactivated
Mode=1
Mode=1 // Bluetooth communication profile Bluetooth HiD
Mode=0 // Bluetooth communication profile Bluetooth SPP
Autoconnect=0
Autoconnect=0 // do not reconnect when Bluetooth connection is lost
Autoconnect=1 // try to reconnect automatically when Bluetooth connection is lost
NOTE: Autocorrect function must be supported by the paired device and the application running on
the paired device.
Page 13 of 23