Teknim VAS-741B Installation & User Manual

VAS-741B Blue Window (Metal Internal Protection)
VAS-741BP Blue Window (Polycarbonate Internal Protection)
VAS-741BX Blue Window (Without Internal Protection)
VAS-741R RED Window (Metal Internal Protection)
VAS-741RP RED Window (Polycarbonate Internal Protection)
VAS-741RX RED Window (Without Internal Protection)
INSTALLATION & USER MANUAL
GENERAL:
Read this manual carefully before operating the devices and save them for later use. Follow all warnings and precautions
mentioned in the user manual. Follow all operating instructions, respectively.
✓ Since the sound level produced by this device may cause hearing loss, it should not be used indoors.
✓ The sound level produced by the device may be harmful to the human ear, use headphones during assembly.
✓ Keep the devices away from water and moisture.
✓ When cleaning the devices, always remove the electrical connection, do not use liquid cleaner (detergent, etc.), clean with
a damp cloth. Always use the device with its own box
✓ Since the device is not mounted securely, it may be harmful to the device and / or environment, so be sure to install the
device on a solid surface.
ENVIRONMENTAL:
Do not operate the device in extreme hot and cold environments except the following conditions.
Temperature : Between -10C ~ +65C
Humidity: %95rH at +40C
VENTILATION:
This device does not need ventilation.
POWER:
Use the device only with the voltage values specified in this manual. If you are unsure about the supply voltage of the device,
please contact your dealer or the manufacturer.
EARTHING AND POLARIZATION:
Before energizing the device, make sure that the grounding is properly connected. Note that the supply voltage is appropriate.
POWER CABLE PROTECTION:
Protect the power cord from being crushed and broken.
POWER LINE:
Especially for external applications, feed with a separate line from the power line of devices such as lighting lamps or power
circuit and keep away from the line of other devices.
OVERLOAD:
To protect against the risk of electric shock or fire, do not connect extension cords and outlets to the device (s) that will draw
more current than usual.
OBJECT AND LIQUID INPUT:
To prevent fire and electric shock, make sure that no liquid or any object can enter the device, which may cause a short circuit.
SERVCE:
In case of any malfunction, contact your dealer or authorized service. Technical intervention to the device must be done by
qualified service personnel.
Do not try to repair the device yourself, if you open the cover of the device, you may be exposed to electric shock.
MALFUNCTIONS REQUIRING SERVICE:
In case of any malfunction or in the following cases, contact your authorized service or dealer.
✓ When the power cord or plug is damaged
✓ Any contact of water, rain or chemical liquid inside the device
✓ When an object falls on the device or is hit
✓ If the device has been dropped or the casing has been damaged
✓ If the device has a noticeable level of performance change
✓ Call the service if the device does not operate normally according to the operating instructions specified in the user manual
or because incorrect operations may cause other malfunctions.,
Release Date: 12.02.2020
Rev:0
1