9.0 WARRANTY & AFTERSALE 1.0 INTRODUCTION Thank you for choosing the Smirthwaite Work ‘n’ Play Nested Table set. This product has been designed to provide a versatile and durable table set which can be neatly stored on its own mobile base when not in use.
2.0 ILLUSTRATION OF YOUR WORK ‘N’ PLAY NESTED TABLES A. Table top B. Mobile base C. Size identifier 2.1 TECHNICAL DATA Size Height (mm) Length (mm) Depth (mm) Max User Weight (kg) Work N Play Nested Tables...
DO NOT fit parts or accessories of other manufacturers to this product unless authorised to do so in writing by G&S Smirthwaite Ltd. Failure to follow these instructions will not only invalidate the guarantee but could make the product dangerous to use.
5.0 HOW TO USE YOUR PRODUCT STOP! The user should NOT be left unattended whilst using the product. Always ensure a responsible therapist or carer is in attendance. The Work ‘n’ Play set can be used in a variety of combinations to assist in therapy sessions/activities.
The product should not be in use while the checks are carried out. 6.2 SERVICE INTERVAL Work ‘n’ Play tables should be serviced every 3 years. Servicing must only be undertaken by a Smirthwaite service engineer, or by a Smirthwaite trained representative. Work N Play Nested Tables...
Page 7
Product service life has been determined based upon the design complexity of product, and the anticipated exposure to normal use. Good practice dictates all Smirthwaite products have been designed and manufactured to high levels of safety and quality, and will meet requirements of normal use when maintained in line with our servicing recommendations.
Page 8
6.4 EXTENDING NOMINAL SERVICE LIFE At Smirthwaite we are proud to produce products that have a reputation for quality and durability. We believe our products have the potential to provide benefits to our clients beyond the nominal service life documented above.
Page 9
DO NOT fit parts or accessories of other manufacturers to this product unless authorized to do so in writing by G&S Smirthwaite Ltd. Any servicing or repairs required must be carried out by G&S Smirthwaite Ltd (or a Smirthwaite trained engineer).
This guarantee is issued at the discretion of G & S Smirthwaite Ltd on RTB (Return to Base) basis. 8.0 CONTINUOUS IMPROVEMENT G & S Smirthwaite Ltd are committed to continuous improvement to their product range. G&S Smirthwaite Ltd reserve the right to change the specification or material without prior notice.
9.0 WARRANTY & AFTERSALE 9.1 Product Information Model: Size: Date of Manufacture: Serial Number: Final Inspection: 9.2 Service & inspection record form: Date Procedure Service Personnel Work N Play Nested Tables...
Need help?
Do you have a question about the 2445 and is the answer not in the manual?
Questions and answers