Specifications; Product Specifications - Nagano Keiki KH15 Series User Manual

4. SPECIFICATIONS

■4.1 Product Specifications
Item
Model number
Pressure sensor seal
system
*1
Pressure range
Maximum allowable
*2
pressure
Supply voltage
Output type
Accuracy (including
linearity, hysteresis and
repeatability)
Operating temp. range
Storage temp. range
Temperature
characteristics
Responsiveness
Wetted materials
Thread size
Weight
*5
Case structure
*6
CE marking
□□
KH15- 3
O-ring type
0 to 0.1, 0 to 0.3, -0.1 to 0 MPa
-0.1 to 0.1, -0.1 to 0.3 MPa
200% of pressure range
24 V DC +/-10% or 12 V DC +/-10%, 15 V DC +/-10%
(Only voltage output is selectable).
4 to 20 mA DC (load resistance 500Ω max.)
(load resistance 10 kΩ min.)
1 to 5 V DC
(load resistance 10 kΩ min.)
0 to 5 V DC
+/-1.0%F.S.
-20 to 70 °C (non-freezing, non-condensing)
-30 to 80 °C (non-freezing, non-condensing)
・+/-0.025%F.S./°C with +/-0.25%F.S. accuracy (both zero/ span)
・+/-0.05%F.S./°C with +/-0.5%F.S. accuracy (both zero/ span)
・+/-0.1%F.S./°C with +/-1.0%F.S. accuracy (both zero/ span)
1 ms or less
Diaphragm : SUS630 (17-4PH)
Fitting : SUS316
O-ring : NBR (standard)
: EPDM
: Fluorine
: Chloroprene
*7
G1/4B, G3/8B, G1/2B
1/4 NPT, 3/8NPT, 1/2 NPT
(R and NPT threads: for the pressure range of 50 MPa or less).
□□
KH15-J (small terminal box): approx. 220 g
□□
KH15-K (large terminal box): approx. 360 g
Equivalent to IP67 (based on JIS C 0920)
Applicable standards: EN61326-1:2013 EN61326-2-3:2013
< Table 4-1 >
8
Details
□□
KH15-
Weld type
-0.1 to 0.5 => -0.1 to 2 MPa
0 to 0.5 => 0 to 120 MPa
200% of pressure range
(150% for 35 and 50 Mpa
120% for 70, 100 and 120 Mpa)
・+/-0.25%F.S.
(However, the pressure range is
3.5 to 20 MPa).
・+/-0.5%F.S.
(However, the pressure range is
0.5 to 50 MPa).
・+/-1.0%F.S.
*4
□□
KH15-
Diaphragm: SUS630 (17-4PH)
Fitting: SUS316
□□
KH15-
Diaphragm: Co-Ni alloy
Fitting: SUS316
, R1/8, R1/4, R3/8, R1/2,
<Table 4-1>
□□
4, 6
*7
*3
4
6
*7
Y-KH15-007A Rev.3