Page 2
TY-KH15-009A Ver. 3 Cautions for proper and safe operation To use this product safely, please read this document and the instruction manual carefully. Incorrect operation may cause malfunction, damage, or an accident. The cautions and warnings in the document are indicated by the following: Warning Indicates that incorrect use may result in severe injury or loss of life.
TY-KH15-009A Ver. 3 2/ 10 Introduction Confirm the specification of the purchased model. Wrong pressure range, power supply or output may cause an accident. Make sure to use appropriate model for the specification and use the product with proper wiring in an appropriate environment. Outline This product is a compact and robust pressure transmitter with semiconductor strain gauge in the pressure detection part.
TY-KH15-009A Ver. 3 3/ 10 Specifications Model number KH15-M□3 KH15-M□4、M□6 Pressure sensor sealing type O ring type Welding type Pressure range 0 to 0.1, 0 to 0.3, -0.1 to 0 MPa -0.1 to 0.5 => -0.1 to 2 MPa -0.1 to 0.1 , -0.1 to 0.3 MPa 0 to 0.5 =>...
TY-KH15-009A Ver. 3 5/ 10 Wire connection diagram and examples of external connection (1) Wire connection 2-wire system 3-wire system Wire color : Red Power supply(+) Wire color: Red Power supply(+) Wire color : White Power supply(-) Wire color : White Wire color : Green Output (2) Examples of external connection...
TY-KH15-009A Ver. 3 6/ 10 Operating principle The pressure receiving part of this product is a diaphragm which converts pressure into strain. The amount of the strain is detected by the semiconductor strain gauge. The detection circuit is the full bridge type whose four sides consist of semiconductor strain gauge. From this bridge circuit, electric signals proportional to the strain are obtained.
TY-KH15-009A Ver. 3 7/ 10 Precautions for use (1) Installation 1) Where the product is connected to the pressure line, DO NOT tight the main body of the case with pipe wrench, etc. For installation, make sure to use hexagonal part of connecting screw 2) When installing to pressure line, DO NOT install the product while liquid is filled up in the pipe.
TY-KH15-009A Ver. 3 8/ 10 (4) Cautions for storage To avoid failures or damages, do not store this product in the places where: ・ exposed to water ・ susceptible to adverse effects due to air pressure, temperature, humidity, ventilation, Cautions sunlight, particles, salt or sulfur in the air.
TY-KH15-009A Ver. 3 9/ 10 (2) Adjustment This product allows output adjustment by removing elastic cover on the side surface. If the elastic cover is removed, the zero point / span adjustment trimmer appears. 1) Zero-point adjustment Zero-point adjustment is performed by rotating zero-point adjustment trimmer with slotted screwdriver.
TY-KH15-009A Ver. 3 10/ 10 (3) Countermeasures against noise Noise problems are complicated and often difficult to solve theoretically. Countermeasures are mostly incomplete. If measured values fluctuate from time to time or differ from the actual pressure value, they may be affected by noise.