Removal Of Tonneau Cover; Replacement Of Tonneau Cover - Toyota HILUX ‘A’ DECK Fitting Instructions Manual

REMOVAL OF TONNEAU COVER

1.
Open tonneau cover. Disconnect the 6-way connector
located in the front/LH tonneau area. Remove the tie clip.
from the bracket. Detach gas strut (1) by inserting a small
screwdriver and adjusting the spring clip (2) on the gas
strut (1). Refer to figure 2.
NOTE: Do not remove the spring clip. only a small
amount of levering is required to detach.
2
2.
NOTE: 2 people are required to lift and remove the
tonneau cover from the vehicle.
Remove hinge pins (1) and remove tonneau cover (2).
Refer to figure 3.
1
FIGURE 3
ISSUE 4: 09/10/18
FIGURE 1
1
1
FIGURE 2
2
Accessory Part No. PZQ70-89870
Hard Tonneau Cover, A-Deck
Accessory Part No. PZQ70-89870

REPLACEMENT OF TONNEAU COVER

1.
NOTE: 2 people are required to lift and fit the tonneau
cover onto the vehicle.
Fit tonneau cover (2) and secure hinges with hinge pins
(1). Refer to figure 5.
2.
Attach gas struts (2) by clipping into place. Ensure
narrow end (1) mounts to the vehicle. Reconnect the
6-way connector located in the front/LH tonneau area.
Refit the tie clip to the bracket. Refer to figure 6.
1
FIGURE 4
2
1
FIGURE 5
1
FIGURE 6
TC0403c
1
2
Page 31 of 34