Canon iR2545i Troubleshooting Manual page 12

Cause The job failed because the USB memory media device was pulled out during transmission.
Remedy Check that the USB memory media device is properly inserted, and then try sending again.
Cause An error occurred while data, such as image data, was being transferred to the USB memory
media device. (The connected device may be formatted with a file system that is not supported
by the machine.)
Remedy Check the status of the USB memory media device, or make sure that the device is formatted
with a file system supported by the machine (FAT16 or FAT32), and then try again.
# 0407
Cause The length of the full path to the specified file (or folder) exceeded the supported limit.
Remedy The full path must not be longer than 120 characters. Change or shorten the file name.
Cause The transmission to the USB memory media device was not properly performed because the
length of the full path including the root and file name exceeded the limit.
Remedy The full path must not be longer than 120 characters. Change or shorten the file name.
Remedy Change the folder to which the data is saved.
# 0701
Cause The specified Department ID does not exist, or the password has changed.
Remedy Enter the correct Department ID or password using ® - ® (numeric keys) on the control panel,
and try again.
# 0703
Cause The memory for image data is full when sending color documents.
Remedy Wait for a few moments and try again after other send jobs are complete.
Remedy Delete documents stored in memory. If the machine still does not operate normally, turn the
main power OFF and then back ON.
# 0705
Cause The send operation was interrupted because the size of the image data is larger than that specified
in <Maximum TX Data Size> in E-mail/I-Fax Settings.
Remedy Change the setting for <Maximum TX Data Size> in E-maiVI-Fax Settings.
Remedy Select a lower resolution.
Remedy If you are using I-fax, decrease the number of pages containing images that you are sending
each time, so that you do not exceed the data size limit specified in <Maximum TX Data Size>.
Remedy Set Divide into Pages to 'On' on the File Format screen.
# 0749
Cause You could not execute the job because a service call message is being displayed.
Remedy Restart the machine. Restarting the Machine, If the machine does not restore, log a service call
# 0751
Cause The file server is not functioning.
Page 12 of 39