NordicTrack ELITE 3760 User Manual page 16

14. Set the Left Handrail Top Cover (73) on the left
Handrail (74). Start four #8 x 3/4" Truss Head
Screws (24) into the Left Handrail Bottom Cover
(75), the left Handrail, and the Left Handrail
Top Cover. Next, slide the Left Handrail Top
and Bottom Covers forward against the console
assembly (H) as shown. Tighten the two middle
Truss Head Screws first. Then, tighten the other
two Truss Head Screws
Attach the Right Handrail Top and Bottom
Covers (81, 82) to the right Handrail (74) as
described above.
15. Raise the Frame (52) to the upright position.
Have a second person hold the Frame until
step 17 is completed.
Remove the two 5/16" x 1 1/4" Screws (16) from
the Latch Crossbar (27).
Orient the Latch Crossbar (27) as shown. Make
sure that the "This side toward belt" sticker
(K) is facing the treadmill.
Attach the Latch Crossbar (27) to the brackets
(L) on the Frame (52) with the two 5/16" x 1 1/4"
Screws (16) and two 5/16" Star Washers (8).
14
H
73
74
24
75
24
Tighten
First
15
L
8
16
52
16
81
74
24
82
24
Tighten
First
K
L
27
8
16