NordicTrack ELITE 3760 User Manual page 18

18. Firmly tighten the four 3/8" x 2 3/4" Screws (23)
and the four 3/8" x 1 1/4" Screws (20).
Then, slide the Left and Right Base Covers
(89, 90) down until they snap into place.
19. Attach the Tablet Holder (87) to the console
assembly (H) with four M4 x 16mm Screws
(108). Note: Start the two top Screws first,
and then start the two bottom Screws. Be
careful not to overtighten the Screws.
IMPORTANT: The Tablet Holder (87) is
designed for use with most full-size tablets.
Do not place any other electronic device or
object in the Tablet Holder.
20. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 34 and 35). Note: Extra parts may be
included.
18
90
23
20
19
Start First
108
18
23
87
108
H
89
23
20