PDU8000 Modular Precision PDC
User Manual (FusionModule2000 V2.0)
8.5.4 Replacing a Fuse
Prerequisites
When replacing a fuse, you must wear insulated gloves, and must not touch the input copper
bar.
Context
Fuses are located at the rear of the PDC, as shown in
example.
Figure 8-12 Fuse location
Table 8-5
scenarios.
Table 8-5 Fuse description for the single-input scenario
Fuse
FU1
FU2
FU3
Issue 02 (2017-02-24)
Tools required: insulated gloves, key to the PDC door
The new fuse is intact and has the same model as the old fuse.
The figures are for reference only. The actual product appearance prevails.
and
Table 8-6
respectively describe the fuses for the single- and dual-input
Specifications
Fuse of the yellow indicator
Fuse of the green indicator
Fuse of the red indicator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Maintenance Guide
Figure 8-12
which uses dual-input as an
139