Table of Contents
Advertisement
Six Node High-Availability DAS Setup Details
show a Sun StorEdge 3511 SATA array connected to six servers in a high-
FIGURE 10
availability DAS configuration.
Server 1
Server 3
Server 5
Sun StorEdge 3511 SATA Array Six Node High-Availability Connections
FIGURE 10
Note – The Sun StorEdge 3511 SATA array cannot be used to store single instances
of data but can be used in multi-path and multi-host configurations where the array
has a backup or archival role.
The general procedure for creating this configuration follows.
1. Add SFPs to support twelve connections.
2. Connect expansion units if needed. See
Capacity Configurations" on page 53
3. Confirm that cache optimization is sequential.
Server 2
Server 4
Server 6
H/D/RCC
H/D/RCC
"Sun StorEdge 3511 SATA Array High
Best Practices for the Sun StorEdge 3510 and 3511 FC Arrays
31
Advertisement
Table of Contents
