Options - Eiki EK-830U Owner's Manual

Options

Laser Mode
High Altitude Mode
Status Display
Control
3D
Information
Select
• When ambient
temperature is over
40°C in operating,
the projector will
switch to "ECO"
automatically.
• Compatible 3D
source, 3D content
and Optical 3D
glasses are required
for 3D viewing.
• "3D Sync Invert" is
only available when
3D is enabled.
• This setting may
need to change
when re-start running
3D movie.
• 3D function is turned
on automatically
when Blu-ray 3D
source is input.
User Settings
Normal
Off
On
Enter Exit
Options
Laser Mode
Set the brightness mode. Choose "Normal" to increase the
brightness or choose "ECO" to dim the projector light source which
will lower power consumption and extend the light source life.
High Altitude Mode
When "On" is selected, the fans will spin faster. Set High Altitude
mode to "On" when the projector is used over 1500m elevation.
Status Display
When "On" is selected, the status will be displayed.
Control
HDMI CEC: Use this function for synchronized power ON/OFF
`
operation between the projector and a CEC-compatible device
connected to the HDMI/MHL port of the projector.
Projector ID: Set the remote control ID for this projector. When
`
multiple adjacent projectors are in operation at the same time,
switching the remote control codes can prevent interference
from other remote controls. After the Projector ID is set, switch
to the same ID for the remote control to control this projector.
Trigger Out: Set the port to provide trigger out function. The
`
available options: Off/DC Out 1/DC Out 2/1 & 2.
3D
3D Sync: Use this option to select the appropriate 3D function.
`
– DLP-Link: Choose "DLP-Link" to use DLP Link 3D Glasses.
– External: Choose "External" to use VESA 3D emitter and 3D
Glasses.
53