Powering On/Off The Projector; Powering On The Projector - Eiki EK-830U Owner's Manual

• If you connect
multiple sources
at the same time,
press "Input" on
the control panel
or the desired
source button
on the remote
control to switch
inputs.
• Turn on the
projector first and
then the signal
sources.
34
Basic Operations

Powering On/Off the Projector

Powering On the Projector

1. Ensure that the power cord and signal cable are securely
connected. The Power indicator will turn red.
2. Remove the lens cap.
3. Turn on the light source by pressing the
panel or on the remote control. The Power indicator will flash
blue.
A warning message regarding lens information will appear. Press
any key to continue.
The startup screen will be displayed and the Power indicator will
turn blue.
4. Turn on your source (computer, notebook, video player, etc.) The
projector will detect your source automatically.
Make sure that the "Auto Source" has been set to "On".
CAUTION:
• Do not look into the lens while the light source is on. The strong
light from the light source may cause damage to your eyesight.
• Do not block the air intake or exhaust. Doing so could cause a fire
due to internal overheating.
• Do not place your hands, face, or other objects near the air
exhaust, the light source cover or the bottom of the unit. Doing so
could result in injury and/or damage the object.
Power
button on the control
Power
ON
OFF
Input
Input